background image

 

ƒ

  Major display deviations (incorrect weighing results) may be experienced 

should electromagnetic fields (e.g. due to mobile phones or radio equipment), 
static electricity accumulations or instable power supply occur. Change 
location or remove source of interference.  

6.2 

Scope of delivery 

Serial accessories: 

ƒ

  Pallet truck scales 

ƒ

 Operating 

Manual 

ƒ

 Paper 

rolls 

ƒ

  Rechargeable battery with power supply unit 

6.3 

Battery power supply 

 
 
 
 
 
 
 
 

Battery compartment 

 
 
 
 
 
 
 
 
The voltage supply takes place via an interchangeable battery module. With a full-
loaded battery module you can weigh approx. 35 hours without interruption (system 
without printer). 
 
If the loading status of the rechargeable battery is too low, the display shows:  

LO-BA

”. If the battery is completely exhausted, the lifting truck switches off 

automatically

 
It is recommended to load the battery at least 6 hours. In that manner a loss of 
battery capacity is avoided.  
If the system is used in shift work or if the system has an integrated printer, it is 
recommended to purchase a supplementary battery module.

 

 
The battery module is loaded using the delivered loading device. When loading, the 
LED of the loading device is lighting. If that LED is off, the battery has been reloaded. 
An overloading of the rechargeable battery is not possible as the loading device 
switches off automatically. 

VHT-BA-e-0910 

9

Summary of Contents for VHT



























Reviews: