KERN ITB 1500K500M, Operating Instructions Manual

Page: 22 / 37

Chapter 3: The menu
22
Configures the scale interfaces: can only be accessed by supervisor!
Standard interface COM1 (RS232C).
Optional interface COM2 (RS232C).
Settings :
Operating mode of interface ––> Chapter 3.7.1
Communication parameters ––> Chapter 3.7.2
Settings for printed reports ––> Chapter 3.7.3
Insert line feeds into printed reports ––> Chapter 3.7.4
Reset interface settings to factory settings ––> Chapter 3.7.5
Manual data output on printer ( key). Factory setting .
Automatic output of stable results on printer (for series weighings).
Continuous output of all weight values via the interace.
Bidirectional communication using MT-SICS commands (to control scale from a PC).
Same as “Continuous” (see above), but with 2 fixed blanks before the unit (compatible
with KERN TB/TS/TT).
Same as “Dialog” (see above), but scale sends 2 fixed blanks before the
unit (compatible with KERN TB/TS/TT).
DigiTOL-compatible format. Weights for transfer can be selected: tare, net, gross
(gross weight is marked with “ B ”).
Same as “dt–b” mode (see above) but gross weight is marked with “ G ”.
“Continuous Weight” mode.
Connects a second display.
COMMUN1
J
J
COM 1
COM 2
J
3.7 Configure interfaces ( COMMUNICATION )
Display Explanation
J
A.Print
CONt1NU
d1ALOG
2nd.d1SP
Print
J
J
J
J
J
J
J
J
J
J
J
J
CONt.OLd
d1AL.OLd
dt - b
dt - G
COnt - Wt
MOdE
3.7.1 Operating mode of interface ( COMMUNICATION –> Mode )
Display Explanation