Chapter 2: Weighing
10
Place the weighing sample on the weighing pan and ...
... read the result (net weight of the weighing sample).
Note
: The tare weight is retained until either a new tare is determined, or the scale is set
to zero or switched off.
If the automatic taring function is active, the tare is automatically cleared when weighing
is completed and the weighing pan emptied; the scale is then ready for the next taring
and weighing.
"46Ð
NET
2.4
Dynamic weighing
For unstable weighing objects (e.g. animals) the dynamic weighing function with
automatic or manual start can be activated (section 3.5.1). If the dynamic weighing
function is active, the mouse symbol appears at the bottom edge of the display.
With dynamic weighing the scale measures 56 weighing values in 4 seconds and
calculates their mean value.
With dynamic weighing and
automatic start
the measurement begins automatically as
soon as there is a change in weight.
With dynamic weighing and
manual start
the measurement is started by touching
the
key.
During dynamic weighing, horizontal segments appear in the display, after which the
calculated mean value is displayed. The star symbol at the left-hand edge indicates that
the result is a calculated one. To start a new weighing cycle, the scale must be unloaded.
Note
: Only activate the dynamic weighing function to weigh unstable goods. In normal
operation the standard weighing function yields more accurate results more rapidly.
2(55Ð
