KEP SUPERtrol II, Manual

Page: 45 / 127

SUPERtrol II Flow Computer
41
Enter the number of decimal places for numerical values.
Note:
• The number of decimal places applies to all displayed
variables and totalizers.
• The number of decimal places is automatically reduced if
there is insufficient space available on the display for large
numbers.
• The number of decimal places set here does not affect the
functions set in the programming setup.
Selection:
0, 1, 2, 3 or 4 (decimal places)
Display:
3
MAX. DEC. POINT
The language can be selected in which all text, parameters and
operating messages are to be displayed.
Note:
• This function is supported by a special capability in the
setup diskette.
Selection:
ENGLISH, OTHER
Display:
ENGLISH
LANGUAGE
Some customer software can not handle very large numbers
(such as 999,999,999) without going to scientific notation (such as
9.9999999E8). This menu can be used to force the totalizers to roll
over at a lower numerical value (such as 999,999).
Input:
Maximum 9 digit number: 0...999999999
Store and Confirm entries with the ENTER key
Display: 999999999
TOTAL ROLL OVER
6.5
DISPLAY
(Continued)
DISPLAY
MAX. DEC. POINT
LANGUAGE
TOTAL ROLL OVER