33
LEVELtrol-II Installation & Operating Instructions
SETUP RELAYS
Rly1
Rly2
Rly3 Rly4
RELAY 2 USAGE
PRWRN LEV OVRUN
more
RELAY 2 USAGE
TEMP DENS ALARM
RELAY 2 MODE
LO_ALARM HI_ALARM
RELAY 2 SETPOINT
####### gal
RELAY 2 HYSTERESIS
##### in
Advance To
SETUP RELAYS 3, 4
Select the desired Relay for setup. (Relay 2)
Select the desired Relay 2 usage.
These selections are available when more is
selected.
If Level, Temp or Dens selected, Select the
desired Relay Activation.
Low: Relay activates when display is below
setpoint.
High: Relay activates when display is above
setpoint.
If Level, Temp or Dens Selected, Enter the
desired Setpoint.
If Level, Temp or Dens Selected, Enter the
desired Hysteresis.
6.4.16 (continued)
SETUP RELAYS
(Relay 2)
BATCH MODE
Sub-menus
Display
Notes
SETUP RELAYS
SETUP RELAYS
Rly1
Rly2
Rly3 Rly4
RELAY 3 USAGE
LEVEL TOTAL OFF
more
RELAY 3 USAGE
TEMP DENS ALARM
RELAY 3 MODE
LO_ALARM HI_ALARM
RELAY 3 SETPOINT
####### gal
RELAY 3 HYSTERESIS
##### in
Advance To
SETUP CONTROL INPUTS
Press ENTER at this prompt to begin the
Relays setup.
Select the desired Relay for setup. (Relay 3/4)
Select Level, Total or Off.
These selections are available when more is
selected.
If Level, Temp or Dens selected, Select the
desired Relay Activation.
Low: Relay activates when display is below
setpoint.
High: Relay activates when display is above
setpoint.
If Level, Temp or Dens Selected, Enter the
desired Setpoint.
If Level, Temp or Dens Selected, Enter the
desired Hysteresis.
6.4.17
SETUP RELAYS
(Relay 3 & 4)
LEVEL/TOT &
Batch MODE
Setup is the same
for Relay 3 & 4.
