27
LEVELtrol-II Installation & Operating Instructions
Sub-menus
Display
Notes
6.4.9
SETUP TANK STYLE
(Sphere)
SETUP TANK STYLE
TANK SHAPE
TBL. VERT HORZ
SPHR
VOLUME CONV. FACTOR
231.0 in3/g
TANK DIAMETER
100 in
SENSOR LOCATION
0.0 in
DISCHARGE LOCATION
0.0 in
Advance To
SETUP PROCESS INPUTS
Press ENTER to begin the tank style
configuration.
Press ENTER when SPHR. is flashing to select
spherical tank.
Enter the requested volume conversion factor
for units shown.
Enter the diameter inside tank.
Enter the distance between the base of tank
and the level sensor location.
(Enter a negative value if the sensor is located below the tank)
Enter the distance between the base of tank
and the discharge location.
(Enter a negative value if it is located below the tank)
6.4.8
SETUP TANK STYLE
(Vertical Cylindrical
or
Horizontal
Cylindrical)
SETUP TANK STYLE
TANK SHAPE
TBL.
VERT HORZ
SPHR
VOLUME CONV. FACTOR
231.0 in3/g
TANK DIAMETER
100 in
Tank Length
800 in
SENSOR LOCATION
0.0 in
DISCHARGE LOCATION
0.0 in
Advance To
SETUP PROCESS INPUTS
Press ENTER to begin the tank style
configuration.
Press ENTER when VERT or HORZ. to select
vertical or horizontal tank.
Enter the requested volume conversion factor
for units shown.
Enter the diameter inside tank.
Enter the length inside tank.
Enter the distance between the base of tank
and the level sensor location.
(Enter a negative value if the sensor is located below the tank)
Enter the distance between the base of tank
and the discharge location.
(Enter a negative value if it is located below the tank)
