Kenwood VZ-5000, Instruction Manual

Page: 7 / 80

English 7
Switching to the Screen Control Screen
Touch the [SCREEN] button.
Exit the Angle Control Screen
Touch the [OK] button.
Switching the TV/Video Screen Mode [MODE]
Touch the A part.
Each time the A part is touched the screen mode
switches as follows:
Display Setting
"FULL" Full screen mode
"JUST" Just screen mode
"ZOOM" Zoom screen mode
"NORMAL" Normal screen mode
You cannot operate when the navigation picture is displayed.
Switching the Speaker Mode [SP]
Touch the B part.
Each time the B part is touched the built-in speaker
mode switches as follows:
Display Picture
"NORMAL" Sound with monitor picture
"TV" Sound with televion picture
(During the KTC-V500N or KTC-V500P is
connected)
"NAV" Sound with navigation picture
"VIDEO1" Sound with video 1 picture
"VIDEO2"/ Sound with video 2 picture
"R-CAM"
"OFF"
Built-in speaker is turned off
Switching the AV Output [AV]
Touch the C part.
Each time the C part is touched the AV output mode
switches as follows:
Display Setting
"NORMAL" Picture/sound with monitor picture
"TV" Picture/sound of the television
(During the KTC-V500N or KTC-V500P is
connected)
"VIDEO1"/ Picture/sound input from the AV IN 1
"NAV" terminal
"VIDEO2"/ Picture/sound input from the AV IN 2
"R-CAM" terminal
Exit the On Screen Mode
Touch the D part.
If you make no operation for 5 seconds, the On screen
control mode is automatically canceled
.
On Screen Control Mode
A
B C
D
When the current setting information is displayed on
the screen, touching a dotted line will enable operation
of each of the following items:
English