Kenwood VZ-5000, Instruction Manual

Page: 16 / 80

16 English
Installation
Installing in Japanese-Made Cars-2
■
or
Accessory B
Accessory
B
Accessory
D
Accessory D
When the vehicle bracket is attached as in Toyota vehicles that use a
hole in the
●
position in the figure below.
Fasten Accessory
D
on both sides as shown in the figure below.
1
Fasten the vehicle bracket.
2
Bend the point of Accessory
D
, and fasten the bracket.
3
If this device can’t be fastened with screws in the 2 places on the right and left due to the vehicle bracket shape, use the
installation fastener (Accessory
D
) and fasten the bracket.
Using a screwdriver or pliers bend the right
and left of Accessory
D so that it can be
fastened to the vehicle bracket hole.
Not use the Hard Rubber Frame
Audio Unit.etc
Screw (Provided with
the Audio Unit.etc)
Screw (Provided with
the Audio Unit.etc)