Kenwood VRS-7100, Instruction Manual

Page: 42 / 64

42
EN
LISTEN MODE
MULTI CONTROL
%
/
fi
/
@
/
#
Stereo
Listen Mode
5
/
∞
Multi
%
/
fi
/
@
/
#
Enter
ENTER
Dimmer
Sound
Sleep
RCV Mode
1
Press the RCV Mode key on the remote control unit to set
it to the receiver control mode.
2
Press the Sound key
3
Press MULTI CONTROL
@
/
#
(or the Multi
@
/
#
key) to
select the setting item and press ENTER (or the Enter key).
Note that some items are not displayed in certain modes.
1
" SP LEVEL ": *1
Adjusting the volume level of each channel
2
" INPUT ": (Analog mode only)
•
Input level adjustment
3
" TONE ": *2
º
Tone level adjustment
4
" EFFECT ": (DSP mode only)
DSP effect leve adjustment
5
" DUAL MONO ": *3
e
Selection between Stereo, Main audio, Sub audio and
Main + Sub audio
6
" MIDNIGHT ": *4
r
Midnight mode adjustment
7
" PANORAMA ": *5
e
Panorama mode ON/OFF
8
" DIMENSION ": *5
e
Dimension adjustment
9
" C WIDTH ": *5
e
Center width adjustment
0
" C IMAGE ": *6
r
Center image mode adjustment
*1 The setting in the SOUND mode is temporary. It returns automati-
cally to the original level set in "
Speaker settings " when the
receiver is turned OFF/ON.
*2 PCM stereo and analog stereo mode only.
*3 DOLBY DIGITAL mode only
*4 DOLBY DIGITAL, DTS mode only
*5 Only when the input signal is a 2-channel signal in the DOLBY PRO
LOGIC
II x MUSIC or DOLBY PRO LOGIC II MUSIC mode.
*6 Only when the input signal is a 2-channel signal in the DTS
NEO:6 MUSIC mode.
4
Use the MULTI CONTROL
%
/
fi
(or the Multi
%
/
fi
) to
adjust the setting as desired.
÷
The adjustment item is displayed for approximately 20 seconds.
5
Press the Sound key again to return to the input indication.
You can make further adjustments to the sound while listening to
playback in the surround mode.
÷
The mode using Sound key is defeated when the REC MODE is
ON.
¤
Adjusting the sound
Adjusting the volume level of each channel
The volume levels of the center speaker, subwoofer, surround speaker
and surround back speaker channels can be adjusted during playback.
1
Press the RCV Mode key on the remote control unit to set
it to the receiver control mode.
2
Press the Sound key
3
Use the MULTI CONTROL
@
/
#
(or the Multi
@
/
#
keys)
to select "SP LEVEL" on setup displays, and press the
ENTER (or Enter key).
4
Use the MULTI CONTROL
@
/
#
(or the Multi
@
/
#
keys)
to select the speaker.
1
Subwoofer level adjustment (" SW " indicator blinks)
2
Center speaker level adjustment (" C " indicator blinks)
3
Surround speaker level adjustment (" LS ", " RS " indicator
blinks)
4
Surround back speaker level adjustment (" LB ", " RB " or
" BS " indicator blinks)
5
Use the MULTI CONTROL
%
/
fi
(or the Multi
%
/
fi
keys)
to adjust the speaker volume level.
+ 1 + 1 ) d / ) B
÷
The level of each speaker channel can be adjusted in 1 dB
steps between -10 dB and +10 dB.
6
Repeat steps
4
and
5
as required.
7
Press the Sound key again to return to the input indication.
÷
The setting in the SOUND mode is temporary. It returns automati-
cally to the original level set in " Speaker settings " when the
receiver is turned OFF/ON.
Adjusting the DSP effect level
(DSP mode only)
The DSP effect level can be adjusted when the listen mode is a DSP surround
mode " ARENA ", " JAZZ CLUB ", " THEATER ", " STADIUM " or " DISCO ".
1
Press the RCV Mode key on the remote control unit to set
it to the receiver control mode.
2
Press the Sound key
3
Use the MULTI CONTROL
@
/
#
(or the Multi
@
/
#
keys)
to select "EFFECT" on setup displays, and press the
ENTER (or Enter key).
4
Use the MULTI CONTROL
%
/
fi
(or the Multi
%
/
fi
) to
adjust the EFECT LEVEL.
E F T C E F 3
÷
The DSP effect level can be adjusted in the range between 1 and 5.
5
Press the Sound key again to return to the input indication.
Convenient functions
*5462/37-44/EN 04.4.13, 8:01 PM 42