33
EN
Listening to radio broadcasts
AUTO/MONO
BAND
INPUT SELECTOR
Auto
7
Tune –
1
/ +
¡
Band
RCV Mode
TUNER
Multi
%
/
fi
MULTI CONTROL
%
/
fi
ENTER
Tuning (non-RDS) radio stations
8 )
8
)
The receiver can store up to 40 stations in the memory and recall them by one-touch operation.Radio stations can be classified into RDS (Radio Data System)
stations and other stations. To listen to or store RDS stations in the preset memory see "
Using RDS (Radio Data System) (For Europe)
".
fi
1
Use the INPUT SELECTOR key (or the TUNER key) to select
the tuner.
2
Use the BAND key (or the Band key) to select the desired
broadcast band.
Each press switches the band.
- -
8 )
8
)
3
Use the AUTO/MONO key (or the Auto
7
key) to select the
desired tuning method.
Each press switches the tuning method to either auto or manual tuning.
1
Auto tuning:
The "
AUTO
" indicator lights up
2
Manual tuning:
The "
AUTO
" indicator goes off
÷
Normally, set to "
AUTO
" (auto tuning). If the radio waves are weak
and there is a lot of interference, switch to manual tuning. (With
manual tuning, stereo broadcasts will be received in monaural.)
4
Use the MULTI CONTROL
%
/
fi
(or Multi
%
/
fi
keys, Tune +/
- keys) to select the station.
Auto tuning:
The next station is tuned automatically.
Manual tuning:
Use the
MULTI CONTROL
%
/
fi
(or
Multi
%
/
fi
) to select the
desired station.
Presetting radio stations
AUTO/MONO
BAND
INPUT SELECTOR
MULTI CONTROL
%
/
fi
ENTER
Collective presetting of stations
(For U.S.A., Canada and Australia)
1
Use the INPUT SELECTOR key (or the TUNER key) to select
the tuner.
2
Use the BAND key (or the Band key) to select he broadcast
band to "FM".
3
Press and hold the ENTER for more than 2 seconds.
A U
O
T
P R
T
E
S
E
The blinking "
AUTO
" display and blinking "
PRESET
" display
appear alternately.
÷
A maximum of 40 stations of the band presently being
received will be preset.
÷
Use the Manual Preset function if a desired FM station
cannot be preset using the Auto Preset function or when it
is required to preset AM stations.
Presetting radio stations manually
1
Tune to the station you want to store.
2
Press the ENTER while receiving the station.
) 1
7 5
8
5
Proceed to step
3
within 5 seconds.
(If more than 5 seconds
elapse, press the ENTER again).
3
Use the MULTI CONTROL
%
/
fi
(or the Multi
%
/
fi
keys) to
select one of the station presets (1 – 40).
4
Press the ENTER again to confirm the setting.
• Repeat steps
1
,
2
,
3
, and
4
to store as many stations as
necessary.
• If you store a station at a previously used preset, the old
station will be replaced by the new one.
"
AUTO
" indicator lights up in the display.
"
TUNED
" indicator is displayed when a
station is received."
ST.
" indicator lights
when a broadcast is being received in
stereo.
7 5
8
5
*5462/20-36/EN
04.4.13, 8:01 PM
33
