![background image](http://html.mh-extra.com/html/kenwood/tm-d710/tm-d710_instruction-manual_191775042.webp)
36
OPTIONS
The following options are available for use with this transceiver:
• MC-45
Microphone
• MC-59
Microphone with keypad
• MCP-2A
Memory Control Program
(web download software)
• MJ-88
Microphone Plug Adapter
• MJ-89
Modular Plug Microphone
Switch
• PG-2N
DC Cable (2 m)
• PG-20
DC Cable (7 m)
• PG-3B
Noise Filter
• PG-5A
Data Cable
• PG-5G
Programming Interface Cable
(2 m)
• PG-5H
PC Interface Cable Kit (2 m)
• PG-5F
Extension Cable Kit (4 m)
• PS-33
DC Power Supply
• PS-53
DC Power Supply
• SP-50B
External Speaker
• VGS-1
Voice Guide & Storage Unit
Note:
Optional accessories for use with this transceiver may change, post-production. (New
options may become available and/or current options may be discontinued.) Please refer to the
options catalog(s) for applicable transceivers.
MeMOry cONTrOl PrOgraM McP-2a
The following functions can be set only by using the MCP-2A software:
• SQC active condition
• Microphone sensitivity level
• 10 MHz mode selection
• Power on password value
Using the MCP-2A software, you can:
• View memory channel groups
• Name memory groups
• Name PM channels
• Save/load settings
• Read exported TravelPlus for Repeaters
™
files issued from the ARRL
™
(There are some version restrictions; refer to the help text of the MCP-2A.)
• Print/export memory and various settings in html
(TravelPlus for Repeaters is a trademark of ARRL.)
To download the MCP-2A software, go to:
http://www.kenwood.com/i/products/info/amateur/software_download.html
Note:
This URL may change without notice.
n
Using the McP-2a Software
1
Follow the directions of the installer to install the software.
2
Set up the PC COM port and baud rate.
3
The transceiver data is read from the MCP-2A software.
4
Select your desired settings, then write the data to the transceiver.
Summary of Contents for TM?D710
Page 51: ......