![background image](http://html.mh-extra.com/html/kenwood/tm-d710/tm-d710_instruction-manual_191775015.webp)
GETTING ACQUAINTED
u
TONE
Press
[TONE]
to turn the Tone function ON.
Each time you press
[TONE]
to toggle the functions as follows: Tone ON >>
CTCSS ON >> DCS ON >> OFF.
i
REV
Press
[REV]
to turn the Reverse function ON or OFF.
Press
[REV] (1s)
to turn the Automatic Simplex Checker ON.
o
LOW
Press
[LOW]
to toggle the transmit output power as follows: High Power (K, E
types only) –> Middle Power –> Low Power.
!0
PF1
Press
[PF1]
to activate its programmable function. The default function is
“Frequency Band Select”.
!1
PF2
Press
[PF2]
to activate its programmable function. The default function is
“Operation Band Select”.
!2
BAND SEL (VOL) Control
Rotate the
[BAND SEL]
control to adjust the speaker volume.
Press the left
[BAND SEL]
to select the A band. Press the right
[BAND SEL]
to select the B band.
Press
[BAND SEL] (1s)
to toggle between single and dual-band mode.
!3
SQL Control
Rotate the
[SQL]
control to adjust the squelch level. Clockwise opens the
squelch and counterclockwise tightens the squelch.
!4
TNC
Press
[TNC]
to turn built-in TNC ON and the APRS (or NAVITRA) mode ON.
Each time you press
[TNC]
, the mode toggles as follows: APRS (or
NAVITRA) mode ON >> PACKET mode ON >> TNC OFF.
• When the built-in TNC turns on, “OPENING TNC” appears on the display.
• When “OPENING TNC” appears on the display, the mode cannot be changed.
!5
PM
Press
[PM]
to enters the PM (Programmable Memory) channel selection
mode.
!6
Press
[ ]
to turn the transceiver power ON and OFF.
Summary of Contents for TM?D710
Page 51: ......