12 Self Proguamming Mode
34
• You can program the QT in steps of 0.1 Hz.
• You can program the QT according to the normal
table of frequencies.
• You can program the DQT (Normal) in steps of 1.
• You can program the DQT (Normal) according to
the normal table of codes.
• The QT/DQT is not used.
Press and hold the [
|
] key for more than 1
second to toggle between Normal and Inverse
when DQT is selected.
• “N” represents Normal.
• “I” represents Inverse.
12.2.1.3 TX
Frequency
This function allows you to program the transmit
frequency.
The current frequency appears after the “T.”.
Press the [
|
] key to change the frequency step.
Press and hold the [
|
] key for more than 1 second
on a programmed Channel, to delete the Channel.
Press and hold the [
|
] key for more than 1 second
on a Channel that is not programmed, to display the
default frequency.
12.2.1.4 QT/DQT
Encode
This function allows you to program the QT/DQT
Encode.
The following display appears when the QT/DQT
Encode is not programmed.
Press the [
|
] key to program a QT frequency or DQT
code.
• You can program the QT in steps of 0.1 Hz.
• You can program the QT according to the normal
table of frequencies.
