8
• Select “ALL” Fleet and “ALL” ID to make a call to all units
(Broadcast call).
S
tAtuS
m
eSSAge
You can send and receive 2-digit Status messages which may
be decided in your talk group. Messages can contain up to
alphanumeric characters. Status messages range from 0 to
(80 ~ are reserved for special messages).
A maximum of received messages (combined status
messages and short messages) can be stored in the stack
memory of your transceiver.
■
Transmitting
1
Select your desired zone and channel.
2
Press the key programmed as
Status
to enter Status
mode (proceed to step ) or
S Status
to enter
Selcall mode (proceed to step 3).
3
Press
/
to select the station you want to call.
• If Manual Dialing is enabled, you can enter a station ID by
using the DTMF keypad.
4
Press
to enter Status mode.
5
Press
/
to select the status you want to transmit.
• If Manual Dialing is enabled, you can enter a status ID by
using the DTMF keypad.
6
Press the
PTT
switch or
Side 2
key to initiate the call.
• “<COMPLETE>” appears on the display when the status
has been successfully transmitted.
■
Receiving
The icon will flash and a calling ID or text message will
appear when a Status call is received. Press any key to
return to normal operation.
Summary of Contents for TK-5220
Page 2: ...VHF P25 TRANSCEIVER UHF P25 TRANSCEIVER TK 5220 TK 5320 Instruction Manual ENGLISH ...
Page 43: ......
Page 44: ......
