![background image](http://html.mh-extra.com/html/kenwood/tk-3230-freetalk-xls-uhf/tk-3230-freetalk-xls-uhf_service-manual_193473006.webp)
TK-3230
6
IBM-PC
KPG-22 or KPG-22A or KPG-22A+KCT-53U
Illustration is KPG-22
插图为KPG-22
KPG-108D
Tuning cable /
调谐电缆
(E30-3216-05)
D-SUB
(25-pin)
Transceiver
对讲机
Transceiver
对讲机
Transceiver
对讲机
KPG-22
PC
Gray
Gray/Black
1.5D-XV Lead wire
1.5D-XV Shield wire
+
–
+
–
SP
MIC
D-SUB
(9-pin)
KPG-22A
PC
USB
KPG-22A
KCT-53U
PC
灰色
灰色/黑色
1.5D-XV导线
1.5D-XV屏蔽线
3. Clone Mode
3-1. Outline
”Clone Mode” copies the transceiver data to another
transceiver.
The dealer can copy the transceiver data to another trans-
ceiver even without the use of a personal computer.
3-2. Example
The transceiver can copy the programming data to one or
more transceivers via RF communication.
The clone source and clone target/s must be in Clone
mode.
3-3. Operation
1. To switch the clone target/s to Clone mode, press and
hold the [PTT] and [MONI] keys while turning the trans-
ceiver power ON.
2. Keep holding [PTT] and [MONI] keys for 1 second. Trans-
ceiver sound key on tone and enters Clone mode with
”
” display.
3. Wait for 2 seconds. Transceiver displays ”
”.
4. Select a channel table number using [UP] (increment
channel table) and [DOWN] (decrement channnel table)
keys.
3. 复制模式
3-1. 概述
“复制模式”能将对讲机数据复制到其他对讲机。
即使没有使用个人电脑,经销商也能将对讲机数据复制到
其他对讲机。
3-2. 实例
通过 R F 通信,对讲机可以将编程数据复制到一台或多台对
讲机。
复制源和复制目标必须均处于复制模式。
3-3. 操作
1. 如需将复制目标切换到复制模式,请在打开对讲机电源的
同时按住 [PTT] 和 [MONI] 键。
2. 按住 [PTT] 和 [MONI] 键 1 秒钟。对讲机响起键音并进入复
制模式,同时显示“
”
。
3. 等候 2 秒钟。对讲机显示“
”
。
4. 使用 [UP]( 增大信道表 ) 和 [DOWN]( 减小信道表 ) 键选择
信道表号。
Fig. 1 /
图 1
REALIGNMENT /
模式组合