TK-3170
17
3. How to Assemble the Antenna Connec-
tor and its Terminal
The antenna connector and its terminal are supplied as
separate parts.
When replacing the antenna connector and/ or terminal,
assemble the parts prior to the replacement.
1) Mount the antenna connector onto the chassis (
q
).
Double-sided tape is attached to the terminal; peel off the
tape cover (
w
).
Attach the terminal to the antenna connector as shown
below.
Slide the antenna terminal along the adhesive cushion on
the chassis so that the adhesive part on the terminal is
firmly attached to the antenna connector (
e
).
2) Remove the antenna connector from the chassis with its
terminal attached, then solder the center part of antenna
connector to its terminal (
r
).
Do not use excessive solder on terminal.
DISASSEMBLY FOR REPAIR
TOP
Bottom
Cushion
q
w
e
r
4. How to Apply the Double-Sided tape
Position the edge of the double-sided tape so that it is in
the center of the hole in the chassis.
5. How to Apply the Fibrous Sheet
Align the fibrous sheet at position “A” in the illustration.
Apply the fibrous sheet so that it does not protrude from
the casing.
6. How to Mount the LCD Fixture
When mounting the LCD fixture onto the PCB, ensure that
it is aligned parallel to the chassis.
Hole of chassis
Double-sided tape
(J99-0399-04)
FPC
Position line “A”
Fibrous sheet
(G10-1304-04)
Chassis
LCD fixture
