TK-3170
14
■
Zone edit mode flow chart
Self programming mode
Channel select mode
Zone select mode
Time-out timer
TOT pre-alert
TOT rekey time
TOT reset time
Option signaling
decode condition
Audio control
[Side2]
[A]
[C]
[B] (Write data)
[C] (Don’t write data)
[B] (Write data)
[C] (Don’t write data)
[B] (Write data)
[C] (Don’t write data)
[B] (Write data)
[C] (Don’t write data)
[B] (Write data)
[C] (Don’t write data)
[B] (Write data)
[C] (Don’t write data)
[S]
[S]
[S]
[S]
[S]
[S]
[S]
[S]
You cannot enter the zone edit mode
when channel data is not set
■
Zone edit mode
1. Press the [A] key so that the “
▼
“ indicator is located on
the left side, above the zone number.
2. Rotate the selector select your desired zone number.
3. Press the [C] key to enter Zone Edit Mode.
4. Press the [C] key again to select the setting you wish to
modify.
5. Rotate the selector to select the desired value.
6. Press the [B] key to store the value in memory and ad-
vance to the next setting.
7. Press the [C] key to skip any settings you do not wish to
modify.
Press the [S] key to exit. “SELF” appears on the display.
No.
Function
Choices
Display
Remarks
Zone Edit
1
Time-out Timer
15~1200/15s
Default=60
2
TOT Pre-alert
Off, 1~10/1s
Default=Off
3
TOT Rekey Time
Off, 1~60/1s
Default=Off
4
TOT Reset Time
Off, 1~15/1s
Default=Off
5
Option Signaling Decode
QT/DQT
←
Default
Condition
Carrier
6
Audio Control
QT/DQT
←
Default
QT/DQT and Option Signaling
QT/DQT or Option Signaling
T O T _ _ _ 6 0
T O T P _ O F F
T O T K _ O F F
T O T S _ O F F
O P D C _ Q T _
O P D C _ C R _
A D C _ Q T _ _
A D C _ A N D _
A D C _ O R _ _
REALIGNMENT (Signaling type for Decode = FleetSync/DTMF)
