1-4 (No.RA012<Rev.001>)
SECTION 1
PRECAUTION
This service manual does not describe PRECAUTION.
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
2.1
SYSTEM SET-UP
2.2
REALIGNMENT
2.2.1 Modes
2.2.2 How to Enter Each Mode
Choose the type of transceiver
Transceiver programming
Merchandise received
A personal computer, programming interface (KPG-22A/22U),
and FPU (programming software) are required for programming.
(The frequency and signaling data are programmed for the
transceiver.)
TX/RX 446.00625~
446.196875
0.5W
TK-3401D E
TK-3401D T
Frequency range (MHz)
RF power
Type
Delivery
Are you using the speaker microphone?
YES
NO
KMC-21, KMC-45
Speaker microphone
(Option)
Mode
Function
User mode
For normal use.
PC
mode
Used to communication between the
transceiver and PC.
Data programming
mode
Used to read and write frequency data and
other features to and from the transceiver.
PC test mode
Used to check the transceiver using the
PC. This feature is included in the FPU.
User mode
Data programming mode
PC test mode
PC tuning mode
PC mode
Mode
Operation
User mode
Power ON
PC mode
Received commands from PC
