ENGLISH
5
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
DISPLAY
EASY MENU
When entering
[FUNCTION]
...
ON
: ZONE 1 illumination changes to white color. ;
OFF
: ZONE 1 illumination remains as
[COLOR SELECT]
color.
( 22)
•
ZONE 2 illumination changes to white color when you enter
[FUNCTION]
,
irregardless of the
[EASY MENU]
setting.
•
Refer to the illustration on page 21 for ZONE identification.
TUNER SETTING
PRESET TYPE
NORMAL
: Memorizes one station for each preset button in each band (FM1/
FM2/FM3/AM/SW1/SW2). ;
MIX
: Memorizes one station for each preset button,
regardless of the selected band.
SYSTEM
KEY BEEP
*
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
TDF ALARM
*
ON
: Activates the alarm if you forget to detach the faceplate when ACC is set to OFF. ;
OFF
: Deactivates.
SOURCE SELECT
PANDORA SRC
ON
: Enables PANDORA in source selection. ;
OFF
: Disables.
( 10)
BUILT-IN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables.
( 7)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not activated).
For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.
FACTORY RESET
YES
: Resets the settings to default (except the stored station). ;
NO
: Cancels.
*
Not applicable if 3-way crossover is selected.
CLOCK
CLOCK DISPLAY
ON
: The clock time is shown on the display even when the
unit is turned off. ;
OFF
: Cancels.
ENGLISH
Select the display language for
[FUNCTION]
menu and music
information if applicable.
By default,
[ENGLISH]
is selected.
TURKCE
Change the crossover type
1
Press
repeatedly to enter STANDBY.
2
Press and hold number buttons
4
and
5
to enter crossover
select.
The current crossover type appears.
3
Turn the volume knob to select “2WAY” or “3WAY”, then
press the knob.
4
Turn the volume knob to select “YES” or “NO”, then press
the knob.
The selected crossover type appears.
• To cancel, press and hold
.
• To adjust the selected crossover settings,
( 19, 20)
.
Caution
Select a crossover type according to how the speakers are
connected.
( 28)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
GETTING STARTED
JS_KWD_KMM_BT303_MN_EN_1.indd 5
JS_KWD_KMM_BT303_MN_EN_1.indd 5
10/6/2016 10:20:30 AM
10/6/2016 10:20:30 AM
