18
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
(or using the remote control)
1
Press
AUD
to enter
[AUDIO CONTROL]
.
2
Press
J
/
K
to select an item, then press
.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SUB-W LEVEL
LEVEL –50
to
LEVEL +10
(
LEVEL 0
): Adjusts the subwoofer output
level.
MANUAL EQ
The sound elements (frequency level, tone level, Q factor) are preset into
each selection (
BAND1 LEVEL
to
BAND13 LEVEL
).
BAND1 LEVEL
LEVEL
LEVEL–9
to
LEVEL +9
(
LEVEL 0
): Adjusts the level to memorize for
each source. (Before making an adjustment, select the source you want
to adjust.)
BASS EXTEND
ON
: Turns on the extended bass. ;
OFF
: Cancels.
BAND2 LEVEL
to
BAND13 LEVEL
LEVEL–9
to
LEVEL +9
(
LEVEL 0
): Adjusts the level to memorize for
each source. (Before making an adjustment, select the source you want
to adjust.)
Q FACTOR
1.35
/
1.50
/
2.00
: Adjust the quality factor.
PRESET EQ
NATURAL
/
ROCK
/
POPS
/
EASY
/
TOP40
/
JAZZ
/
POWERFUL
/
USER
: Selects
a preset equalizer suitable to the music genre. (Select
[USER]
to use the
settings made in
[MANUAL EQ]
.)
BASS BOOST
LEVEL1
/
LEVEL2
/
LEVEL3
/
LEVEL4
/
LEVEL5
: Selects your preferred bass
boost level. ;
OFF
: Cancels.
LOUDNESS
LEVEL1
/
LEVEL2
: Selects your preferred low and high frequencies boost
to produce a well-balanced sound at a low volume level. ;
OFF
: Cancels.
SUBWOOFER SET
ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
FADER
(Not applicable if 3-way crossover is selected.)
R15
to
F15
(
0
): Adjusts the rear and front speaker output balance.
BALANCE
L15
to
R15
(
0
): Adjusts the left and right speaker output balance.
VOLUME OFFSET
–15
to
+6
(
0
): Preset the initial volume level of each source. (Before
adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
(Not applicable for TUNER source and AUX source.)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ;
OFF
: Cancels.
SPACE ENHANCE
(Not applicable for TUNER source.)
SMALL
/
MEDIUM
/
LARGE
: Virtually enhances the sound space. ;
OFF
: Cancels.
SND REALIZER
LEVEL1
/
LEVEL2
/
LEVEL3
: Virtually makes the sound more realistic. ;
OFF
: Cancels.
STAGE EQ
LOW
/
MIDDLE
/
HIGH
: Virtually adjust the sound position heard from
the speakers. ;
OFF
: Cancels.
DRIVE EQ
ON
: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ;
OFF
: Cancels.
SPEAKER SIZE
Depending on the crossover type you have selected
( 5)
, 2-way
crossover or 3-way crossover setting items will be shown
( 19, 20)
.
By default, 2-way crossover type is selected.
X’OVER
DTA SETTINGS
For settings,
20, Digital Time Alignment Settings.
CAR SETTINGS
•
For 2-way crossover:
[SUB-W LEVEL]
/
[SUBWOOFER SET]
is selectable only if
[SWITCH PREOUT]
is set to
[SUBWOOFER]
.
( 4)
•
[SUB-W LEVEL]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
ENGLISH
JS_KWD_KMM_BT303_MN_EN_1.indd 18
JS_KWD_KMM_BT303_MN_EN_1.indd 18
10/6/2016 10:21:22 AM
10/6/2016 10:21:22 AM
