NXR-810
11
2. Accessory Cabinet
You can install optional accessories, such as a DC power
supply or duplexers, in the accessory cabinet.
1. Place the optional accessory in the cabinet as shown be-
low.
2. If necessary, attach cushions (G13-1801-04 and/or G13-
1802-04) to the top plate (J21-8559-04) in order to adjust
the space between the cabinet and the top plate. Then,
insert the 3 tabs of the plate into the slots in the side of
the cabinet. High, middle, or low positions are available.
To affi x the plate, inset and tighten the 2 screws on the
other side of the plate.
You can also fl ip the top plate upside-down to adjust the
height of the cabinet space.
INSTALLATION /
安装
2. 附件柜
可以在附件柜中安装 DC 电源或双工器等选购附件。
1. 如下图所示，将选购附件安置在附件柜中。
2. 如 有 必 要， 可 将 缓 冲 垫 ( G13-1801-04 和 / 或 G13-1802-
04) 安装到顶板 ( J21-8559-04) 上，以调整附件柜和顶板
之间的空间。然后，
将顶板的 3 个卡舌插入附件柜侧的插槽。
具有高、中、低三种位置。要固定顶板，请在顶板的另一
侧插入并拧紧 2 颗螺丝。
也可以翻转顶板，以调整附件柜空间的高度。
Fig. 2 /
图 2
or/
或
Top plate /
顶板
(J21-8559-04)
The top plate can be inverted to adjust the height of the cabinet space.
可以翻转顶板来调整附件柜空间的高度。
Cushions /
缓冲垫
(G13-1801-04 or G13-1802-04)
(G13-1801-04或G13-1802-04)
Tighten screws
拧紧螺丝
Insert the plate tabs to set the height
position (high, middle, or low).
插入顶板卡舌以设定高度(高、中或低)。
