32
VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT
VOICE RECORDER
The voice recorder allows you to record conversations and
create voice memos.
■
Auto Recording (NX-200/ NX-300/ NX-200G/ NX-
300G Only)
If activated, the auto recorder will continuously record all
transmitted and received signals. The recording storage
area retains only the last 30 seconds of recording.
■
Voice Memos (NX-200/ NX-300/ NX-200G/ NX-300G Only)
To record a voice memo for later playback:
1
Press the key programmed as
Voice Memo
, press and
hold the key programmed as
Playback
, or access the
Menu {page 15}.
•
The duration of recording memory will appear on the
display and begin counting down.
2
Speak into the microphone to record your memo.
3
Press to end the recording and store it in memory.
•
If the memory becomes full, recording will stop and the
voice memo will be stored in memory.
■
Auto Reply Message
(NX-200/ NX-300/ NX-200G/ NX-300G Only)
You can set the transceiver to automatically respond to
Individual Calls while using FleetSync/NXDN.
1
Press the key programmed as
Auto Reply Message
to
enter Auto Reply Message mode.
2
When you receive an Individual Call, the transceiver will
send an automatic response to the caller after
3 seconds, and “GREETING” appears on the display.
•
If you are available to receive the call, press any key to
cancel the auto response.
