12
BASIC OPERATIONS
SWITCHING POWER ON/OFF
Turn the
Power
switch/
Volume
control clockwise to switch the
transceiver ON.
Turn the
Power
switch/
Volume
control counterclockwise fully
to switch the transceiver OFF.
■
Transceiver Password
(NX-200/ NX-300/ NX-200G/ NX-300G Only)
If the transceiver is password protected, “PASSWORD” will
appear on the display when the power is turned ON. To
unlock the transceiver, enter the password:
1
Select a character using
/
.
•
On keypad models, you can enter the password directly.
2
Press to enter the selected character.
•
This step is unnecessary when using the keypad.
3
Repeat steps 1 and 2 to enter the entire password.
• Press or
#
to delete a character. Press and hold
or
#
to delete all characters.
4
Press or
to confi rm the entry.
•
If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
•
The password can contain a maximum of 6 digits.
ADJUSTING THE VOLUME
Rotate the
Power
switch/
Volume
control to adjust the volume.
Clockwise increases the volume and counterclockwise
decreases it.
SELECTING A ZONE AND CHANNEL/GROUP ID
Select the desired zone using the key programmed as Zone
Select or Zone Up/Down. Each zone contains a group of
channels.
