14
■
Making Individual Calls (Digital)
(NX-200/ NX-300/ NX-200G/ NX-300G Only)
If a key has been programmed with
Individual
or
Indi Status
, you can make calls to specifi c
persons.
1
Press the key programmed as
Individual
or
Indi Status
.
2
Press
/
to select a unit ID from the list.
•
On keypad models, you can enter a unit ID directly.
3
Press and hold the
PTT
switch to make the call.
•
Speak into the transceiver as you would during a normal
transmission.
RECEIVING
Select the desired zone and channel. If signaling has been
programmed on the selected channel, you will hear a call only
if the received signal matches your transceiver settings.
Note:
Signaling allows your transceiver to code your calls. This will
prevent you from listening to unwanted calls. Refer to “S
IGNALING
” on
page 26 for details.
■
Receiving Group Calls (Digital)
When you receive a group call on a Conventional channel
and the received group ID matches the ID set up on your
transceiver, you can hear the caller’s voice.
When you receive a group call on a Trunking channel, the
transceiver automatically switches to the communications
channel to receive the call.
■
Receiving Individual Calls (Digital)
When you receive an individual call, a ringing tone will sound
and the caller’s ID will appear on the display (NX-200/ NX-200G
/NX-300/ NX-300G Only). To respond to the call, press and
hold the
PTT
switch and speak into the transceiver as you
would during a normal transmission.
