13
Select the desired channel/group ID using the Selector knob
(default). Each channel/group ID is programmed with settings
for transmitting and receiving.
•
You can toggle the display between the zone and channel/group
ID names and number by pressing the key programmed as Display
Format, or by accessing the Menu (NX-200/ NX-200G/ NX-300/
NX-300G Only) {page 15}.
Note:
If the default settings for
/
(NX-200/ NX-200G/
NX-300/ NX-300G Only) and the Selector knob have been changed,
use the appropriate keys to select the zone and channel/group ID.
TRANSMITTING
1
Select the desired zone and channel/group ID.
2
Press the key programmed as
Monitor
or
Squelch Off
to
check whether or not the channel is free.
•
If the channel is busy, wait until it becomes free.
3
Press
the
PTT
switch and speak into the microphone.
Release the
PTT
switch to receive.
•
For best sound quality, hold the transceiver approximately
1.5 inches (3 ~ 4 cm) from your mouth.
■
Making Group Calls (Digital)
(NX-200/ NX-300/ NX-200G/ NX-300G Only)
If a key has been programmed with
Group
or
Group +
Status
, you can select a group ID from the list to make a
call to those parties on a Conventional channel.
To select a group ID:
1
Press the key programmed as
Group
or
Group + Status
.
2
Press
/
to select a group ID/name from the list.
3
Press and hold the
PTT
switch to make the call.
•
Speak into the transceiver as you would during a normal
transmission.
