Kenwood MDX-G1 Instruction Manual Download

Page: 5 / 64

Preparation

section

Be sure to insert each connection cord securely. If a cord is plugged in incompletely, audio may not
be output or noise may be generated.

Before connecting or disconnecting any connection cord, be sure to first unplug the power cord
from the wall power outlet.

Do not install the speakers near a TV set. Otherwise, color irregularities due to magnetism may be
observed on the TV screen.

Be sure to put the unit to the STANDBY mode (page 63) before unplugging the power cord.

Continued on next page

When removing the power cord connection,
unplug the power plug of the wall outlet
first.

The provided antenna has
been designed for indoor
use. Place it in a position as
apart as possible from a TV
and power cords and orient
it to obtain the best receiv-
ing condition.

Connecting the accessories

POWER cord

To an AC wall outlet

AM loop antenna

Antenna assembly
method

Extend the FM antenna and
orient it to obtain the best re-
ceiving condition possible.

FM rod antenna

*5053/04-09/EN

5/29/01, 10:56 AM

Summary of Contents for MDX-G1

































































Search results

Summary of Contents for MDX-G1

Reviews:

Related manuals for MDX-G1

Brands by name

Popular brands

Kenwood MDX-G1, Instruction Manual

Search results

Summary of Contents for MDX-G1

Reviews:

Related manuals for MDX-G1

Brands by name

Popular brands