Kenwood MDX-G1 Instruction Manual Download

Page: 23 / 64

Application

section

Main unit only

Press the AUX key to select the
AUX input.

Play the connected AUX compo-
nent to check the volume.

Press the MENU key.

Press the VOLUME/MULTI CON-
TROL keys to select “AUX IN-
PUT?”, then press the SET/TUN-
ING MODE key.

Adjusting the AUX input
level

The input level from an AUX component con-
nected to the AUX IN jacks (MD player, ana-
log turntable, VCR, etc.) can be adjusted. It is
recommended to adjust it so that the AUX
input sounds at a similar volume to the built-
in CD and MD.

Press the VOLUME/MULTI CON-
TROL keys to fine adjust the in-
put level, then press the SET/
TUNING MODE key.

The input level can be adjusted in the
range from -5 to +2.

Tone

TUNER

FM/AM

STOP

SOUND

MD REC

BEST HITS

AUX

VOLUME

/MULTI CONTROL

PUSH OPEN

SET

TUNING
MODE

/ TUNING

TUNING/

VOLUME/
MULTI CONTROL

MENU

AUX

SET/
TUNING MODE

TUNED

AUTO

TRACK NO.

EX. BASS

MHz

TUNED

AUTO

TRACK NO.

EX. BASS

MHz

*5053/20-27/EN

5/29/01, 10:57 AM

Summary of Contents for MDX-G1

































































Search results

Summary of Contents for MDX-G1

Reviews:

Related manuals for MDX-G1

Brands by name

Popular brands

Kenwood MDX-G1, Instruction Manual

Search results

Summary of Contents for MDX-G1

Reviews:

Related manuals for MDX-G1

Brands by name

Popular brands