Kenwood MDX-G1 Instruction Manual Download

Page: 17 / 64

Basic

section

Press the MD O.T.E. key on the remote.

If you are operating the main unit :

(1) Press the MENU key.

(2) Press the VOLUME/MULTI CONTROL keys

to select “MD O.T.E. ?”, then press the
SET/TUNING MODE key.

(3) Pressing the DISPLAY/CHARAC. key on the

remote will switch the displayed information.

Recording the CD track being played (Single-track recording)

(1)

Play the CD track to be recorded.

(2)

Press the MD O.T.E. key on the remote.
When you are operating the main unit, see step

Recording starts after returning to the beginning of the current track.

To stop recording in the middle :

Press the

STOP key.

Be careful not to switch the power off or apply shock or vibrations to the system while “MD
WRITING” is displayed.

For the types of MDs that can be recorded on this unit, see “Handling of MD”. (page 54)

It is also possible to record a CD onto an MD at double speed. (page 29 to 30)

The CD audio is recorded following the settings made with MD REC MODE. (page 28)

The MD O.T.E. recording is not available if the CD is played in the random mode. Cancel the
random mode before proceed to recording. (page 26)

When recording with high volume, sound skip may occur during MD playback. To avoid this prob-
lem, reduce the volume during recording.

“O.T.E.” blinks

MD recording
indicator

MD track number

Remaining recording
time of MD

CD track number

MD recording
indicator

Elapsed time of CD
track being played

TUNED

AUTO

TRACK NO.

O.T.E. SP

REC

EX. BASS

MHz

TUNED

AUTO

TRACK NO.

O.T.E. SP

REC

EX. BASS

MHz

TUNED

AUTO

TRACK NO.

O.T.E. SP

REC

EX. BASS

MHz

*5053/10-19/EN

5/29/01, 10:57 AM

Summary of Contents for MDX-G1

































































Search results

Summary of Contents for MDX-G1

Reviews:

Related manuals for MDX-G1

Brands by name

Popular brands

Kenwood MDX-G1, Instruction Manual

Search results

Summary of Contents for MDX-G1

Reviews:

Related manuals for MDX-G1

Brands by name

Popular brands