Kenwood MDX-G1 Instruction Manual Download

Page: 38 / 64

Press the

key repeat-

edly to select the destination po-
sition where you want to insert
the moved tracks, then press the
SET key.

Display when 3 tracks are inserted be-
tween tracks 33 and 34.

Press the ENTER key.

Press the

)

EJECT key on the

main unit to eject the MD.

“MD WRITING” is displayed.

To cancel the Q. MOVE operation in the mid-
dle :

Press the MD EDIT key any time before the
end of step

Editing can be canceled provided that it is
attempted before “MD WRITING” is dis-
played. For the procedure, see “Canceling
editing” (page 44).

TUNED

AUTO

TRACK NO.

DISC

O.T.E.

REC

EX. BASS

MD-EDIT

MHz

Number of selected tracks to be moved

TUNED

AUTO

TRACK NO. DISC

O.T.E.

REC

EX. BASS

MD-EDIT

MHz

TUNED

AUTO

PROG.

EX. BASS

MD-EDIT

TUNED

AUTO

PROG.

EX. BASS

MD-EDIT

Be careful not to switch the power off or ap-
ply shock or vibrations to the system while
“MD WRITING” is displayed.

*5053/34-44/EN

5/29/01, 11:01 AM

Summary of Contents for MDX-G1

































































Search results

Summary of Contents for MDX-G1

Reviews:

Related manuals for MDX-G1

Brands by name

Popular brands

Kenwood MDX-G1, Instruction Manual

Search results

Summary of Contents for MDX-G1

Reviews:

Related manuals for MDX-G1

Brands by name

Popular brands