Kenwood KRF-V6300D Instruction Manual Download Page 42

Page: 42 / 48

KRF-V6300D

VOLUME

MUTE

DIMMER

SPEAKERS A/B/OFF

VOLUME CONTROL

DIMMER

Display dimmer adjustment

The dimmer function lets you select the brightness of the display
and indicators of this unit. You might find this useful if you darken
your room to watch movies or listen to music.

Press [DIMMER].

The brightness of the display changes among the 3
available settings. Select the brightness level you find
most pleasing.

• The brightness of the LED indicators changes in 2 levels.

Listening with headphones

Operation available only on the main unit.

Press [SPEAKERS A/B/OFF] so that the speaker

indicator goes off.

Make sure the "SP" indicator is turned off.

If you turn off all of the speakers when in surround
mode, the surround mode will be canceled as well,
resulting in stereo playback.

∑

Connect headphones to the PHONES jack.

PHONES

Use [VOLUME

ﬁ

] to adjust the volume.

Muting the sound

Operation available only on the remote control unit.

Press [MUTE] to mute the sound of the speakers.

"MUTE" indicator blinks.

To cancel

Press [MUTE] again so that the "MUTE" indicator goes
off.

MUTE can also be deactivated by adjusting volume.

Convenient functions

B60-5772-00̲00̲EN.indd 42

08.7.24 1:29:53 PM

Summary of Contents for KRF-V6300D

















































Search results

Summary of Contents for KRF-V6300D

Reviews:

Related manuals for KRF-V6300D

Brands by name

Popular brands

Kenwood KRF-V6300D, Instruction Manual

Search results

Summary of Contents for KRF-V6300D

Reviews:

Related manuals for KRF-V6300D

Brands by name

Popular brands