English
23
Speaker setup ("SP SETUP")
This sets up the speakers according to the speaker system in
use. Speaker setup is required every time the speaker system is
changed.
œ
See <Getting into the setup mode> (
™
) and
select "SP SETUP".
∑
Use [MULTI CONTROL
∞
/
5
] to select the subwoofer
setting.
Speaker
Display
Setting
Subwoofer
"SUBW ON"
With Subwoofer
"SUBW OFF"
Without Subwoofer
é
Press [SETUP].
®
Repeat steps
∑
–
é
for the rest of the speaker
setting.
Speaker
Display
Setting
Front speaker
"FRNT LRG"
Large size front speaker
"FRNT NML"
Average size front speaker
Center speaker
"CNTR NML"
Average size center speaker
"CNTR LRG"
Large size center speaker
"CNTR OFF"
No center speaker is connected.
Surround speaker
"SURR NML"
Average size surround speaker
"SURR LRG"
Large size surround speaker
"SURR OFF"
No surround speaker is connected.
Surround Back
speaker
"BS LRG"
Large size surround back speaker
"BS NML"
Average size surround back speaker
"BS OFF"
No surround back speaker is connected.
"BS L/R"*
1
Left and Right Surround Back speakers are
connected.
"BS MONO"*
1
Only one Surround Back speaker is
connected.
Subwoofer re-
mix*
2
"RMX ON"
Subwoofer re-mix is on.
"RMX OFF"
Subwoofer re-mix is off.
*
1
This selection is available when either "BS LRG" or "BS NML" is
selected.
*
2
The function for adding the bass of other channels to the
subwoofer channel according to the speaker setup.
†
Go to the next setting, "TEST TONE".
If you wish to exit the setup mode, see <To exit the
setup mode>
™
.
• Reference for speaker size
"LRG" : A speaker with a sufficient bass reproduction capability (a
speaker with a large woofer or a large cabinet size).
"NML" : A speaker with a lower bass reproduction capability than
the "LRG" speakers (the bass frequencies will be output
from the speakers set to "LRG" and the subwoofer).
If you cannot identify the size of a speaker, it is recommended to
set it to "NML".
• When "SUBW OFF" is selected, the front speakers are
automatically set to "FRNT LRG".
• For "FRNT LRG" selection, no sound will be heard from subwoofer
even it is set to ON. However, if you select "RMX ON", you will be
able to hear sound from the subwoofer.
• When in STEREO mode, the sound goes directly to front speakers.
• If "FRNT NML" is selected, "LRG" cannot be selected for the other
speakers.
• If "CNTR NML" or "CNTR OFF" is selected, "SURR LRG" cannot be
selected.
• If "SURR OFF" is selected, no surround back speaker can be
selected.
• "BS LRG" cannot be selected unless "SURR LRG" is selected.
• If "BS MONO" is selected, surround back signal can only be output
at the SURROUND BACK L terminal.
B60-5772-00̲00̲EN.indd 23
B60-5772-00̲00̲EN.indd 23
08.7.24 1:29:32 PM
08.7.24 1:29:32 PM
