1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [A.ADJ] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
4
Adjust the Audio item
Press the [
4
] or [
¢
] button.
Audio Control
2
Enter Control mode
Press the [AUD] button.
3
Select the Sound type
Press the [#1]
—
[#5] button.
Press button
Sound setting
Display
[#1]
Flat
"DB-1"
[#2]
Rock
"DB-2"
[#3]
Pops
"DB-3"
[#4]
Jazz
"DB-4"
[#5]
Easy
"DB-5"
When the dB(Sound Coordinate) setting is changed, the Bass and
Treble set in audio control replace the dB(Sound Coordinate) values.
4
Exit Control mode
Press the [AUD] button.
You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRC] button.
dB (Sound Coordinate)
Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it’s ON, "LOUD" indicator is ON.
Loudness
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it’s ON, the "ATT" indicator blinks.
Attenuator
Increasing Volume
Press the [
u
] button.
Decreasing Volume
Press the [
d
] button.
Volume
General features
— 6 —
English
B64-2381-00 02.9.25 2:44 PM Page 6
