— 29 —
The follow ing messages are displayed w hen certain problems are occurring in your system. Take the recommended
actions.
Nothing has been recorded on the M D.
The next M D is automatically played back
BLANK
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
Load the disc magazine properly.
]
EJECT
No tracks are recorded on the M D, although it has a title.
The next M D is automatically played back.
]
NO TRACK
The protective circuit in the unit activates w hen the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all
operation.
Cool dow n the unit by opening the w indow s or turning on the air conditioner. As the temperature falls below 60°C (140°F), the
disc starts playing again.
]
HOLD
No disc has been loaded in the disc magazine.
Load a disc into the disc magazine.
The CD is very dirty. The CD is upside-dow n. The CD is scratched a lot.
Clean the CD and load it correctly.
]
]
E-04
No disc has been loaded in the disc magazine.
Load a disc into the disc magazine.
]
NO DISC
Something is w rong w ith the disc magazine. Or the unit is malfunctioning for some reason.
Check the disc magazine. And then press the reset button on the unit. If the "E- 99" code does not disappear, consult your nearest
service centre.
]
E-99
The unit is malfunctioning for some reason.
Press the reset button on the unit. If the "E- 77" code does not disappear, consult your nearest service centre.
]
E-77
http://www.usersmanualguide.com/
