Other features
(See page 7)
— 21 —
A udio Cont rol Set t ing
Adjust various parameters of sound quality.
Press the AUD button to enter the control mode.
Each time the AUD button is pressed, the adjustment mode
display changes as follow s:
If you do not move to step 2 in 5 seconds, the unit w ill sw itch
back to the volume adjustment mode (i.e., the normal mode).
Source tone memory
Each source (tape, FM , AM , and disc changer) has its ow n mem -
ory in w hich to store the bass and treble tone settings.
The settings made for a particular source are then recalled auto-
matically w henever you use that source (e.g., FM mode uses the
tone settings made for FM , AM for AM , etc.).
Press the
d
/
u
buttons to adjust the mode show n in the dis-
play.
Use the follow ing table as a guide for adjusting the settings in
each mode.
2
N OTE
1
7
Bass
7
Treble
7
Balance
7
Fader
7
Volume
Bass
(“ BAS” )
Treble
(“ TRE” )
Balance
(“ BAL” )
Fader
(“ FAD” )
Bass decreased.
Treble decreased.
Left channel empha-
sized.
Rear channel
increased.
Bass increased.
Treble increased.
Front channel
increased.
Right channel empha-
sized.
Adjustment
mode
(Display)
d
button
u
button
Operation of Audio control button
Clock D isplay
Display the time.
Sw itching to Time Display:
Press the CLK button repeatedly until the clock is displayed.
A djust ing Tim e
When the RDS station tuned into is transmitting a time signal,
have the unit’s built-in time adjust automatically to the cor-
rect local time.
Adjusting the Time:
Tune into an RDS station for 3 or 4 minutes.
The time adjusts automatically to the correct local time.
•
The displayed time cannot be set manually, but only through
RDS station time signals.
•
The time is not adjusted w hen the RDS station you are tuned to
is not transmitting a time signal. Choose another RDS station in
such a case.
N OTE
TEL M ut e Funct ion
1
Shut dow n the audio system temporarily w henever an incom -
ing call is received.
The function w ill not w ork if a cable is not connected to the car
phone.
When the telephone rings:
When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.
Restoring Original Unit Source During Phone Call:
Press the SRC button.
"CALL" disappears from the display, and the volume of the orig-
inal source is restored gradually.
Turning TEL M ute Function Off After Phone Call:
Hang the phone up.
"CALL" disappears from the display.
The original source (i.e., the one used before the phone call) is
returned to automatically, and the volume restored gradually.
N OTE
Function of the KRC-259R,159RA/RG,21R
http://www.usersmanualguide.com/
