4
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1
Press the volume knob.
[
YES
] is selected for the initial setup.
2
Press the volume knob again.
“DEMO OFF”
appears.
Set the clock
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to select [
CLOCK
], then press the knob.
3
Turn the volume knob to select [
CLOCK ADJUST
], then press the
knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5
Turn the volume knob to select [
CLOCK FORMAT
], then press the
knob.
6
Turn the volume knob to select [
12H
] or [
24H
], then press the knob.
7
Press and hold
to exit.
To return to the previous setting item, press
.
While in clock display screen...
Press and hold
to enter clock adjustment mode directly.
Then, perform step
4
to set the clock.
1
Set the initial settings
1
Press
repeatedly to enter STANDBY.
2
Press the volume knob to enter [
FUNCTION
].
For
:
Pressing
AUD
enters [
AUDIO CONTROL
] directly.
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4
Repeat step
3
until the desired item is selected or activated.
5
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SWITCH
PREOUT
REAR
/
SUB-W
: Selects whether rear speakers or a subwoofer are connected
to the line out terminals on the rear (through an external amplifier).
SP SELECT
OFF
/
5/4
/
6 × 9/6
/
OEM
: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
TUNER SETTING
PRESET TYPE
NORMAL
: Memorizes one station for each preset button in each band
(
5
). ;
MIX
: Memorizes one station for each preset button, regardless of
the selected band.
SYSTEM
KEY BEEP
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
TDF ALARM
ON
: Activates the alarm if you forget to detach the faceplate when ACC is
set to OFF. ;
OFF
: Deactivates.
SOURCE SELECT
PANDORA SRC
(For
)
ON
: Enables PANDORA in source selection. ;
OFF
: Disables. (
9
)
BUILT-IN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables. (
10
)
2
3
JS_KWD_KMM_U21_MN_EN_4.indd 4
JS_KWD_KMM_U21_MN_EN_4.indd 4
2/9/2014 9:56:52 AM
2/9/2014 9:56:52 AM
