Kenwood KMM-BT209, Instruction Manual

Page: 25 / 148

ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth®
Make a call using voice recognition
1 Press and hold to activate the voice recognition of the connected
phone.
2 Speak the name of the contact you want to call or the voice command
to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select
[CALL HISTORY]
,
[PHONE BOOK]
or
[NUMBER DIAL] , then press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold one of the number buttons (1 to 6).
“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select [NUMBER DIAL] in step 2,
store a blank number in step 3 and proceed to step 4.
Make a call to a registered number
1
Press to enter Bluetooth mode.
2 Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
“NO MEMORY” appears if there is no contact stored.
Bluetooth mode settings
1
Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
Default: [XX]
[BT MODE]
[PHONE SELECT] Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
• You can connect a maximum of two Bluetooth phones and one
Bluetooth audio device at a time.
[AUDIO SELECT]
[DEVICE DELETE] 1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO] , then press the knob.
[PIN CODE EDIT]
(0000) Changes the PIN code (up to 6 digits).
1 Turn the volume knob to select a number.
2 Press
S
/
T
to move the entry position.
Repeat step 1 and step 2 until you finish entering the PIN code.
3 Press the volume knob to confirm.
[RECONNECT] [ON] : The unit is automatically reconnect when the last connected
Bluetooth device is within the connectable range. ; [OFF] : Cancels.
[AUTO PAIRING]
For / :
[ON] : The unit is automatically paired with the supported Bluetooth device
(iPhone/iPod touch) when it is connected through USB input terminal.
Depending on the operating system of the connected device, this function
may not work. ;
[OFF] : Cancels.
KMM-BT358_E_B5A-3849-00_EN_1st Draft.indd 17 KMM-BT358_E_B5A-3849-00_EN_1st Draft.indd 17 9/7/2021 9:14:02 AM 9/7/2021 9:14:02 AM