Kenwood KMM-BT209, Instruction Manual

Page: 13 / 148

ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Remote control (RC-406)
Remote sensor (Do not expose to bright sunlight.)
Pull out the insulation sheet when using for
the first time.
: Can be remotely controlled with an optionally purchased
remote control.
/ : Remote control functions are not available.
Getting Started
1
Select the display language, acknowledge the crossover
type and cancel the demonstration
When you turn on the power for the first time (or
[FACTORY RESET]
is set to
[YES] , see page 7), the display shows: “SEL LANGUAGE” “PRESS”
“VOLUME KNOB”
1 Turn the volume knob to select
[EN]
(English) /
[RU]
(Russian) /
[SP] (Spanish) / [FR] (French) / [GE] * (German), then press the knob.
[EN]
is selected for the initial setup.
Then, the display shows: “2-WAY X ’ OVER” or “3-WAY X ’ OVER” “PRESS”
“VOLUME KNOB” “TO CONFIRM”.
2
Press the volume knob to acknowledge the current crossover type.
• To change the crossover type, see “Change the crossover type” on
page 7.
Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.
3
Press the volume knob again.
[YES]
is selected for the initial setup.
4
Press the volume knob again.
“DEMO OFF” appears.
* Only for / .
How to replace the battery
Basics
To On the remote control
Adjust the volume Press VOL or VOL .
• Press and hold VOL to continuously increase
the volume to 15.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source Press SRC repeatedly.
Turn off the power
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
KMM-BT358_E_B5A-3849-00_EN_3rd Draft_1.indd 5 KMM-BT358_E_B5A-3849-00_EN_3rd Draft_1.indd 5 1/28/2022 12:29:55 PM 1/28/2022 12:29:55 PM