Kenwood KMM-BT209, Instruction Manual

Page: 23 / 148

ENGLISH
15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate On the remote control
First incoming call...
Answer a call
Press or the
volume knob or
one of the number
buttons (1 to 6). Press .
Reject a call
Press .
Press .
End a call
Press .
Press .
While talking on the first incoming call...
Answer another
incoming call and hold
the current call
Press . Press .
Reject another incoming
call
Press .
Press .
While having two active calls...
End current call and
activate held call
Press .
Press .
Swap between the
current call and held call Press . Press .
Adjust the phone
volume*1
[00] to [35] (Default: [15] )
Turn the volume
knob during a call. Press VOL *2 or
VOL during a call.
Switch between hands-
free and private talk
modes*3
Press 6
IW
during
a call.
( Not available )
Bluetooth®
*1 This adjustment will not affect the volume of the other sources.
*2 Press and hold VOL
to continuously increase the volume to 15.
*3 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [FUNCTION] .
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated.
4
Press and hold to exit.
To return to the previous setting item, press .
Default: [XX]
[MIC GAIN] [–10] to [+10] ( [–4] ): The sensitivity of the microphone increases as the
number increases.
[NR LEVEL] [LEVEL –5] to [LEVEL +5] ( [LEVEL 0] ): Adjust the noise reduction level
until the least noise is being heard during a phone conversation.
[ECHO CANCEL] [LEVEL –5] to [LEVEL +5] ( [LEVEL 0] ): Adjust the echo cancellation
delay time until the least echo is being heard during a phone conversation.
• Call quality may depend on mobile phone.
Make the setting for answering a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select
[SETTINGS]
, then press the knob.
3
Turn the volume knob to select [AUTO ANSWER] , then press the knob.
4 Turn the volume knob to select the time (in seconds) for the unit to
answer the call automatically, then press the knob.
[01]
to
[30]
, or select
[OFF]
to cancels. (Default:
[OFF]
)
5
Press and hold to exit.
To return to the previous setting item, press .
KMM-BT358_E_B5A-3849-00_EN_1st Draft.indd 15 KMM-BT358_E_B5A-3849-00_EN_1st Draft.indd 15 9/7/2021 9:14:02 AM 9/7/2021 9:14:02 AM