Kenwood KDC-X8006U Instruction Manual Download Page 28

Page: 28 / 40

English

Menu system

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the unit.

Select AMP Control mode

Turn the Control knob.

Select the "AMP Control" display.

Enter AMP Control mode

Press the Control knob for at least 1 second.

Select the AMP Control item for adjustment

Push the Control knob towards up or down.

⁄

• For the details on the AMP Control item, see the

Instruction manual attached to the LX AMP.

Adjust the AMP Control item

Push the Control knob towards right or left.

Exit AMP Control mode

Press the [FNC] button.

⁄

• You cannot use the LX AMP operation during standby

mode.

In FM reception

CRSC (Clean Reception System Circuit)

Temporarily have reception alternate from stereo to
mono to reduce multi-path noise when listening to
the FM station.

Display

Setting

"CRSC : ON"

The CRSC is ON.

"CRSC : OFF"

The CRSC is OFF.

⁄

• Strong electrical fields (such as from power lines) may

cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.

Other than Standby mode

B.M.S. (Bass Management System)

Adjust the bass boost level of the external amplifier
using the main unit.

Display

Setting

"AMP Bass : Flat"

Bass boost level is flat.

"AMP Bass : +6"

Bass boost level is low (+6dB).

"AMP Bass : +12"

Bass boost level is mid (+12dB).

"AMP Bass : +18"

Bass boost level is high (+18dB).

⁄

• Refer to the catalog or instruction manual for power

amplifiers that can be controlled from this unit.

• For amplifiers, there are the models you can set from Flat

to +18 dB, and the models you can set from Flat to +12
dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass : +18" will not work
correctly even if it is selected.

Other than Standby mode

B.M.S. Frequency Offset

Setting the central frequency, boosted by B.M.S.

Display

Setting

"AMP FREQ : Normal"

Boost with the normal central frequency.

"AMP FREQ : Low"

Drop the normal central frequency 20%.

B64-3638-00̲00̲M̲English.Indd 28

07.1.5 10:27:08 AM

Summary of Contents for KDC-X8006U









































Search results

Summary of Contents for KDC-X8006U

Reviews:

Related manuals for KDC-X8006U

Brands by name

Popular brands

Kenwood KDC-X8006U, Instruction Manual

Search results

Summary of Contents for KDC-X8006U

Reviews:

Related manuals for KDC-X8006U

Brands by name

Popular brands