manualshive.com logo in svg

Kenwood KDC-X8006U, Instruction Manual, Page: 39 / 40

Share
Download
Kenwood KDC-X8006U Instruction Manual Download Page 39

English

   

|

   

39

No Device: 

The USB device is selected as a source 
although no USB device is connected. 

➪

  Change the source to any source other 

than USB. Connect an USB device, and 
change the source to USB again.

N/A Device: 

An unsupported USB device is connected.

➪

  For the supported USB devices, refer to 

<http://www.kenwood.com/usb/>.

No Music Data/ Error 15: 

•  The connected USB device contains no 

playable audio file.

 

•  Media was played that doesn’t have data 

recorded that the unit can play.

USB Error: 

The connected USB device is rated a current 
capacity higher than the allowable limit. 

➪

  Check the USB device with reference to 

<http://www.kenwood.com/usb/>.

 

Some trouble may have occurred to the 
connected USB device.

➪

  Change the source to any source other 

than USB. Remove the USB device.

iPod Error: 

Connection to the iPod has failed.

➪

  Remove the USB device and then 

reconnect it.

➪

  Confirm that the software for the iPod is 

the latest version.

USB REMOVE:  The Remove mode has been selected for the 

USB device. You can remove the USB device 
safely. 

B64-3638-00̲00̲M̲English.Indd   39

B64-3638-00̲00̲M̲English.Indd   39

07.1.5   10:27:15 AM

07.1.5   10:27:15 AM

Summary of Contents for KDC-X8006U









































Reviews:

No comments