Kenwood KDC-X7529 Instruction Manual Download Page 24

Page: 24 / 38

English

Menu system

In Standby mode

Selectable Illumination

Selecting the button illumination color as green
or red.

Display

Setting

"KEY GRN"

The illumination color is green.

"KEY RED"

The illumination color is red.

In Standby mode

Dimmer

Dimming this unit’s display automatically when
the vehicle light switch is turned ON.

Display

Setting

"DIM ON"

The display dims.

"DIM OFF"

The display doesn’t dim.

In Standby mode

Built-in Amp Setting

Built-in amplifier is controlled.
Turning OFF this control enhances the preout
quality.

Display

Setting

"AMP ON"

The built-in amplifier activates.

"AMP OFF"

The built-in amplifier deactivates.

Other than Standby mode/
When the Dual Zone System is ON

Dual Zone System Setting

Setting the Front channel and Rear channel
sound in the Dual Zone System.

Display

Setting

"ZONE2 R"

Sub source (Auxiliary input source) is to be rear
channel.

"ZONE2 F"

Sub source (Auxiliary input source) is to be front
channel.

Other than Standby mode

B.M.S. (Bass Management System)

Adjust the bass boost level of the external
amplifier using the main unit.

Display

Setting

"BMS FLT"

Bass boost level is flat.

"BMS +6"

Bass boost level is low (+6dB).

"BMS +12"

Bass boost level is mid (+12dB).

"BMS +18"

Bass boost level is high (+18dB).

• Refer to the catalog or instruction manual for power

amplifiers that can be controlled from this unit.

• For amplifiers there are the model that can be set

from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "BMS +18" won’t work correctly
even if it’s selected.

Other than Standby mode

B.M.S. Frequency Offset

Setting the central frequency boosted by B.M.S.

Display

Setting

"BMSF NML"

Boost with the normal central frequency.

"BMSF LOW"

Drop the normal central frequency 20%.

In Standby mode

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.

Display

Setting

"DSI ON"

LED flashes.

"DSI OFF"

LED OFF.

B64-2985-00̲M̲English̲r0.Indd 24

04.11.16 6:45:12 PM

Summary of Contents for KDC-X7529







































Search results

Summary of Contents for KDC-X7529

Reviews:

Related manuals for KDC-X7529

Brands by name

Popular brands

Kenwood KDC-X7529, Instruction Manual

Search results

Summary of Contents for KDC-X7529

Reviews:

Related manuals for KDC-X7529

Brands by name

Popular brands