English
|
27
Audio Preset Memory
Registering the value setup by Sound Control. The
memory can't be erased by the Reset button.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 9)
- <Audio Setup> (page 10)
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Audio Preset mode
Push the Control knob to [FM] or [AM].
Select the "A-PRESET" display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
5
Select the Audio Preset Memory
Push the Contol knob to [FM] or [AM].
Select the "MEMORY" display.
6
Put the Audio Preset in the memory
Press the Control knob for at least 2 seconds.
The "MEMORY" display blinks 1 time.
7
Exit Menu mode
Press the [MENU] button.
• Register 1 pair of Audio Preset Memory. You can't
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items can't be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
Audio Preset Call
Recalling the sound setup registered by <Audio
Preset Memory> (page 26).
1
Select the source
Press the [SRC] button.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Audio Preset mode
Push the Control knob to [FM] or [AM].
Select the "A-PRESET" display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
5
Select the Audio Preset Call
Push the Contol knob to [FM] or [AM].
Select the "CALL" display.
6
Call up the Audio Preset
Press the Control knob for at least 2 seconds.
The "CALL" display blinks 1 time.
7
Exit Menu mode
Press the [MENU] button.
• The User memory of <System Q> (page 10) is
changed to the value which was recalled.
• The source tone memory item of <Audio Control>
(page 9) is changed to the value which was recalled
by the selected source.
B64-2985-00̲M̲English̲r0.Indd 27
B64-2985-00̲M̲English̲r0.Indd 27
04.11.16 6:45:14 PM
04.11.16 6:45:14 PM
