34
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Do the required wiring.
( 35)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1
Detach the faceplate.
2
Fit the catch pin on the extraction keys into
the holes on both sides of the trim plate,
then pull it out.
3
Insert the extraction keys deeply into the
slots on each side, then follow the arrows
as shown on the illustration.
Installing the unit (in-dash mounting)
Hook on the top side
Orientate the trim plate as
illustrated before fitting.
Basic procedure
1
Remove the key from the ignition switch, then disconnect the
[
terminal of the car battery.
2
Install the DAB antenna.
See Installing the DAB antenna.
( 37)
3
Connect the wires properly.
See Wiring connection.
( 35)
4
Install the unit to your car.
See Installing the unit (in-dash mounting).
5
Connect the
[
terminal of the car battery.
6
Press
to turn on the power.
7
Detach the faceplate and reset the unit within 5 seconds. ( 3)
INSTALLATION/CONNECTION
Part list for installation
(A)
Faceplate
(C)
Mounting sleeve
(B)
Trim plate
(D)
Wiring harness
(E)
Extraction key
JS_KWD_KDC_X7200DAB_EN_EN_4.indd 34
JS_KWD_KDC_X7200DAB_EN_EN_4.indd 34
8/24/2017 8:50:28 AM
8/24/2017 8:50:28 AM
