22
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
AUDIO SETTINGS
While listening to any source...
1
Press
AUDIO
to enter
[AUDIO CONTROL]
directly.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SUB-W LEVEL
LEVEL –50
to
LEVEL +10
(
LEVEL 0
): Adjusts the subwoofer
output level.
MANUAL EQ
The sound elements (frequency level, tone level, Q factor) are
preset into each selection.
62.5HZ LEVEL
LEVEL
LEVEL –9
to
LEVEL +9
(
LEVEL 0
): Adjusts
the level to memorize for each source. (Before
making an adjustment, select the source you
want to adjust.)
BASS
EXTEND
ON
: Turns on the extended bass. ;
OFF
: Cancels.
100 HZ/160 HZ/250 HZ/
400 HZ/630 HZ/1 KHZ/
1.6KHZ/2.5KHZ/4 KHZ/
6.3KHZ/10 KHZ/16 KHZ
LEVEL
LEVEL –9
to
LEVEL +9
(
LEVEL 0
): Adjusts the level to
memorize for each source. (Before making an adjustment,
select the source you want to adjust.)
Q FACTOR
1.35
/
1.50
/
2.00
: Adjust the quality factor.
PRESET EQ
NATURAL
/
ROCK
/
POPS
/
EASY
/
TOP40
/
JAZZ
/
POWERFUL
/
USER
: Selects a preset equalizer suitable to the music genre.
(Select
[USER]
to use the settings made in
[MANUAL EQ]
.)
BASS BOOST
LEVEL1
/
LEVEL2
/
LEVEL3
/
LEVEL4
/
LEVEL5
: Selects your
preferred bass boost level. ;
OFF
: Cancels.
LOUDNESS
LEVEL1
/
LEVEL2
: Selects your preferred low and high frequencies boost
to produce a well-balanced sound at a low volume level. ;
OFF
: Cancels.
SUBWOOFER SET
ON
: Turns on the subwoofer output. ;
OFF
: Cancels.
FADER
(Not applicable if 3-way crossover is selected.)
REAR 15
to
FRONT15
(
0
): Adjusts the rear and front speaker output
balance.
BALANCE
LEFT 15
to
RIGHT15
(
0
): Adjusts the left and right speaker output
balance.
VOLUME OFFSET
LEVEL –15
to
LEVEL +6
(
LEVEL 0
): Preset the initial volume level of
each source. (Before adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND
RECONSTRA
(Sound
reconstruction)
(Not applicable for RADIO source, DIGITAL AUDIO source and AUX source.)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ;
OFF
: Cancels.
SPACE
ENHANCER
(Not applicable for RADIO source and DIGITAL AUDIO source.)
SMALL
/
MEDIUM
/
LARGE
: Virtually enhances the sound space. ;
OFF
: Cancels.
SOUND REALIZER
LEVEL1
/
LEVEL2
/
LEVEL3
: Virtually makes the sound more realistic. ;
OFF
: Cancels.
STAGE EQ
LOW
/
MIDDLE
/
HIGH
: Virtually adjust the sound position heard from
the speakers. ;
OFF
: Cancels.
DRIVE EQ
ON
: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ;
OFF
: Cancels.
SPEAKER SIZE
Depending on the crossover type you have selected
( 6)
, 2-way
crossover or 3-way crossover setting items will be shown.
( 23, 24)
By default, 2-way crossover type is selected.
X’OVER
DTA SETTINGS
For settings,
24, 25, Digital Time Alignment settings
.
CAR SETTINGS
•
[SUB-W LEVEL]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
JS_KWD_KDC_X7200DAB_EN_EN_4.indd 22
JS_KWD_KDC_X7200DAB_EN_EN_4.indd 22
8/24/2017 8:50:25 AM
8/24/2017 8:50:25 AM
