ENGLISH
17
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN
LEVEL –10
to
LEVEL +10
(
LEVEL –4
): The sensitivity of the
microphone increases as the number increased.
NR LEVEL
LEVEL –5
to
LEVEL +5
(
LEVEL 0
): Adjust the noise reduction level until
the least noise is being heard during a phone conversation.
ECHO CANCEL
LEVEL –5
to
LEVEL +5
(
LEVEL 0
): Adjust the echo cancellation delay
time until the least echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step 2 until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
BLUETOOTH®
Default:
XX
SETTINGS
AUTO ANSWER
1
to
30
: The unit answers incoming call automatically in the selected
time (in seconds). ;
OFF
: Cancels.
BATTERY/
SIGNAL*
AUTO
: Shows the strength of the battery and signal when the unit
detects a Bluetooth device and the Bluetooth device is connected. ;
OFF
: Cancels.
*
Functionality depends on the type of the phone used.
Make a call
You can make a call from the call history, phonebook, or dialing the
number. Call by voice is also possible if your mobile phone has the
feature.
1
Press
to enter Bluetooth mode.
“(First device name)” appears.
• If two Bluetooth phones are connected, press
again to switch to
another phone.
“(Second device name)” appears.
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press and hold
to exit.
To return to the previous setting item, press
.
CALL HISTORY
(Applicable only if the phone supports PBAP.)
1
Press the volume knob to select a name or a phone number.
• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part
of the display to indicate the previous call status.
•
Press
DISP
to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
2
Press the volume knob to call.
JS_KWD_KDC_X7200DAB_EN_EN_4.indd 17
JS_KWD_KDC_X7200DAB_EN_EN_4.indd 17
8/24/2017 8:50:24 AM
8/24/2017 8:50:24 AM
