MIC
P.CONT
ILLUMI
ANT.
CONT
MUTE
REMO.CONT
L
R
AUX
34
|
KDC-BT7539U
Connecting Wires to Terminals
Battery
Ground wire (Black)
-
(To car chassis)
FM/AM antenna input
Fuse (10A)
Wiring harness
(Accessory
1
)
Ignition wire (Red)
Battery wire (Yellow)
ACC
Car fuse box
If no connections are made, do not let the wire come out from the tab.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Ignition key switch
Car fuse box
(Main fuse)
To Kenwood disc changer/ External optional accessory
⁄
To connect these leads, refer to the relevant instruction manuals.
Motor antenna control wire (Blue)
Mute wire (Brown)
To connect the Kenwood navigation system, consult your navigation
manual.
Dimmer control wire (Orange / White)
To car light control switch
Depending on what antenna you are using, connect either to the control
terminal of the motor antenna, or to the power terminal for the booster
amplifier of the film-type antenna.
To use the steering wheel
remote control feature, you
need to an exclusive remote
adapter (not supplied) matches
your car is required.
Steering remote control
(Light Blue/Yellow)
AUX input (Stereo)
Use the mini-plug which is stereo type and does not
have any resistance.
Front output
Sub Woofer output
Rear output
USB connector (1m)
To USB device
⁄
Do not remove the cap when
you do not use the USB cable.
The connector will cause the
unit to malfunction if it gets in
touch with any metallic part of
the vehicle.
Microphone Unit
(Accessory
3
) (3 m)
Power control wire (Blue/White)
When using the optional power amplifier, connect to its power control
terminal.
B64-4164-00̲00̲M̲English.indd 34
B64-4164-00̲00̲M̲English.indd 34
08.4.8 9:06:00 AM
08.4.8 9:06:00 AM
