English
|
19
Audio Adjustments
Audio Setup
You can set Sound system , such as follows;
Adjustment Item Display
Range
Front High Pass Filter “HPF-F”
Through/40/ 60/80/100/120
/150/180/220 Hz
Rear High Pass Filter “HPF-R”
Through/40/ 60/80/100/120
/150/180/220 Hz
Low Pass Filter
“LPF”
50/60/80/100/120/Through
Hz
Subwoofer Phase
“SW PHASE”
Reverse (180°)/ Normal (0°)
Volume offset
“VOL-OFFSET”
–8 — ±0 (AUX: -8— +8)
Loudness
“LOUD”
OFF/ON
Dual Zone System
“2 ZONE”
OFF/ON
⁄
• Volume offset: Sets each source’s volume as a difference
from the basic volume.
• Loudness: Compensates for low and high tones during
low volume. (Only the low tone is compensated for
when the tuner is selected as a source.)
• Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by “Zone2” of
<Function Control> (page 6).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [AUD] knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 19) or [
5
]/[
∞
] button on the remote control
(page 28).
- The Audio Control has no effect on sub source.
1
Select the source to adjust
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2
Enter Audio Setup mode
Press the [AUD] knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the [AUD] knob.
4
Adjust the Audio setup item
Turn the [AUD] knob.
5
Exit Audio Setup mode
Press the [AUD] knob for at least 1 second.
Audio Control
You can adjust following Audio Control items ;
Adjustment Item Display
Range
Rear volume
“REAR VOLUME” 0 — 35
Subwoofer level
“SUB-W LEVEL”
–15 — +15
System Q
“USER”/“ROCK”/
“POPS”/“EASY”/
“TOP40”/“JAZZ”/
“NATURAL”
User setting/Rock/Pops/Easy/
Top 40/Jazz/Natural
Bass level*
“BASS LEVEL”
–8 — +8
Middle level*
“MIDDLE LEVEL”
–8 — +8
Treble level*
“TREBLE LEVEL”
–8 — +8
Balance
“BALANCE”
Left 15 — Right 15
Fader
“FADER”
Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
* Source tone memory: Puts the set up value in the
memory per source.
⁄
• “USER”: The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1
Select the source to adjust
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2
Enter Audio Control mode
Press the [AUD] knob.
3
Select the Audio item to adjust
Press the [AUD] knob.
4
Adjust the Audio item
Turn the [AUD] knob.
5
Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob or [
0
]
and [ATT] button.
B64-4164-00̲00̲M̲English.indd 19
B64-4164-00̲00̲M̲English.indd 19
08.4.8 9:05:54 AM
08.4.8 9:05:54 AM
