20
|
KDC-BT7539U
Audio Adjustments
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type
Display
OFF
“OFF”
For 5 & 4 in. speaker
“5/4inch”
For 6 & 6x9 in. speaker
“6x9/6inch”
For the OEM speaker
“O.E.M.”
1
Enter Standby
Select the “STANDBY” display.
For how to select source item, refer to <Power/
Source Select button> of <Basic Operation> (page
4).
2
Enter Speaker Setting mode
Press the [AUD] knob.
“SP SEL” is displayed.
3
Select the Speaker type
Turn the [AUD] knob.
4
Exit Speaker Setting mode
Press the [AUD] knob.
Audio Preset Memory
Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 19)
- <Audio Setup> (page 19)
2
Select Audio Preset item during Menu
mode (Other than Standby mode)
Select the “Audio Preset” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
3
Enter Audio Preset mode
Press the Control knob for at least 1 second.
4
Select the Audio Preset Memory
Turn the Control knob.
Select the “Memory” display.
5
Determine whether to put the Audio Preset in
the memory
Press the Control knob.
“Memory?” is displayed.
6
Put the Audio Preset in the memory
Select “YES” using the Control knob.
Press the Control knob.
“Memory Completed” is displayed.
7
Exit Audio Preset mode
Press the [FNC] button.
⁄
• Register 1 pair of Audio Preset Memory. You cannot
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items cannot be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
B64-4164-00̲00̲M̲English.indd 20
B64-4164-00̲00̲M̲English.indd 20
08.4.8 9:05:54 AM
08.4.8 9:05:54 AM
