Kenwood KDC-400U Instruction Manual Download Page 28

54

   

|

   

KDC-400U

English

   

|

   

55

Contents

FM tuner section

Frequency range (200 kHz step)

:  87.9 MHz – 107.9 MHz

Usable sensitivity (S/N = 30dB)

:  9.3dBf (0.8 μV/75 Ω)

Quieting Sensitivity (S/N = 46dB)

:  15.2 dBf (1.6 μV/75 Ω)

Frequency response (±3 dB)

:  30 Hz – 15 kHz

Signal to Noise ratio (MONO)

:  70 dB (±400 kHz)

Stereo separation

:  40 dB (1 kHz)

AM tuner section

Frequency range (10 kHz step)

:  530 kHz – 1700 kHz

Usable sensitivity (S/N = 20dB)

:  28 dBµ (25 µV)

CD player section

Laser diode

:   GaAlAs

Digital filter (D/A) 

:  8 Times Over Sampling

D/A Converter

:  24 Bit

Spindle speed (Audio files)

:  500 – 200 rpm (CLV)

Wow & Flutter

:  Below Measurable Limit

Frequency response (±1 dB)

: 10 Hz – 20 kHz

Total harmonic distortion (1 kHz) 

: 0.010 %

Signal to Noise ratio (1 kHz)

: 105 dB

Dynamic range

:  93 dB

MP3 decode

:  Compliant with MPEG-1/2 Audio Layer-3

WMA decode

:  Compliant with Windows Media Audio

AAC decode 

:  AAC-LC “.m4a” files

USB interface

USB Standard

: USB1.1/ 2.0 (Full speed)

File System 

: FAT16/ 32

Maximum Supply current

: DC 5 V   1 A

MP3 decode 

:  Compliant with MPEG-1/2 Audio Layer-3

WMA decode 

:  Compliant with Windows Media Audio

AAC decode 

:  AAC-LC “.m4a” files

Audio section

Maximum output power

:  50 W x 4

Full Bandwidth Power (at less than 1% THD) 

:  22 W x 4

Speaker Impedance

:  4 – 8 Ω

Tone action

Bass : 100 Hz ±8 dB
Middle : 1 kHz ±8 dB
Treble : 12.5 kHz ±8 dB

Preout level/ Load (CD)

: 2500 mV/10 kΩ

Preout impedance

:  ≤ 600 Ω

Auxiliary input

Frequency response (±3 dB)

:  20 Hz – 20 kHz

Input Maximum Voltage

:  1200 mV

Input Impedance

:  10 kΩ

General

Operating voltage

: 14.4 V (11 – 16V allowable)

Maximum Current consumption

:  10 A

Installation Size (W x H x D) 

:  182 x 53 x 160 mm 

7-3/16 x 2-1/16 x 6-5/16 inch

Weight

:  2.9 lbs (1.3 kg)

Specifications

Specifications subject to change without notice.

2

CAUTION

Use of controls or adjustments or performance of 

procedures other than those specified herein may 

result in hazardous radiation exposure.  

In compliance with Federal Regulations, following 

are reproductions of labels on, or inside the product 

relating to laser product safety. 

JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN

THIS PRODUCT COMPLIES WITH DHHS RULES 

21 CFR SUBCHAPTER J IN EFFECT AT DATE OF 

MANUFACTURE.

Location :  Top plate

FCC WARNING

This equipment may generate or use radio 

frequency energy. Changes or modifications to this 

equipment may cause harmful interference unless 

the modifications are expressly approved in the 

instruction manual. The user could lose the authority 

to operate this equipment if an unauthorized change 

or modification is made.

FCC NOTE

This equipment has been tested and found to 

comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules.  These limits are 

designed to provide reasonable protection against 

harmful interference in a residential installation.  This 

equipment may cause harmful interference to radio 

communications, if it is not installed and used in 

accordance with the instructions.  However, there 

is no guarantee that interference will not occur in a 

particular installation.  If this equipment does cause 

harmful interference to radio or television reception, 

which can be determined by turning the equipment 

off and on, the user is encouraged to try to correct 

the interference by one or more of the following 

measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment 

and receiver.

•  Connect the equipment into an outlet on a 

circuit different from that to which the receiver is 

connected.

•  Consult the dealer or an experienced radio/TV 

technician for help.

• 

The “AAC” logo is a trademark of Dolby Laboratories.

• 

iTunes is a trademark of Apple Inc.

• 

“Made for iPod” and “Made for iPhone” mean that an 
electronic accessory has been designed to connect 
specifically to iPod or iPhone, respectively, and has 
been certified by the developer to meet Apple 
performance standards. Apple is not responsible for the 
operation of this device or its compliance with safety 
and regulatory standards. Please note that the use of 
this accessory with iPod or iPhone may affect wireless 
performance.

• 

iPhone, iPod, iPod classic, iPod nano, and iPod touch 
are trademarks of Apple Inc., registered in the U.S. and 
other countries.

• 

Sirius, XM and all related marks and logos are 
trademarks of Sirius XM Radio Inc. All rights reserved.

• 

PANDORA, the PANDORA logo, and the Pandora trade 
dress are trademarks or registered trademarks of 
Pandora Media, Inc., used with permission.

CALIFORNIA, USA

This product contains a CR Coin Cell Lithium Battery which 
contains
Perchlorate Material – special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate

Summary of Contents for KDC-400U






























Reviews: