6
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Other settings
1
Press the volume knob to enter [
FUNCTION
].
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
TUNER SETTING
LOCAL SEEK
ON
: Searches only stations with good reception. ;
OFF
: Cancels.
•
Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
AUTO
MEMORY
YES
: Automatically starts memorizing 6 stations with good reception. ;
NO
: Cancels.
•
Selectable only if [
NORMAL
] is selected for [
PRESET TYPE
]. (
5
)
MONO SET
ON
: Improves the FM reception, but the stereo effect may be lost. ;
OFF
: Cancels.
NEWS SET
ON
: The unit will temporarily switch to News Programme if available. ;
OFF
: Cancels.
REGIONAL
ON
: Switches to another station only in the specific region using the “AF”
control. ;
OFF
: Cancels.
AF SET
ON
: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor. ;
OFF
: Cancels.
TI
ON
: Allows the unit to temporarily switch to Traffic Information if available
(“TI” lights up). ;
OFF
: Cancels.
RADIO
Search for a station
1
Press
repeatedly to select TUNER.
2
Press
repeatedly (or press
on RC-406) to
select FM1/ FM2/ FM3/ MW/ LW.
3
Press
(or press
on RC-406) to search for a
station.
•
To change the searching method for
: Press
repeatedly.
AUTO1
: Automatically search for a station.
AUTO2
: Search for a preset station.
MANUAL
: Manually search for a station.
•
To store a station
: Press and hold one of the number buttons (
1
to
6
).
•
To select a stored station
: Press one of the number buttons (
1
to
6
) (or
press one of the number buttons (
1
to
6
) on RC-406).
Direct Access Tuning (using RC-406)
1
Press
DIRECT
to enter Direct Access Tuning.
2
Press the number buttons to enter a frequency.
3
Press
to search for a station.
• To cancel, press
or
DIRECT
.
• If no operation is done for 10 seconds after step
2
, Direct Access Tuning
is automatically canceled.
JS_KWD_KDC_300UVM_M2N_EN_5.indd 6
JS_KWD_KDC_300UVM_M2N_EN_5.indd 6
22/9/2015 11:35:58 AM
22/9/2015 11:35:58 AM
